Nobody voluntarily considers replacing heating until the old furnace breaks down in the middle of winter or when maintenance and repair costs become unreasonable. Replacing heating with an IR system in such moments offers the fastest way to reliable heat without breaking up the house and costly professional interventions. Instead of investing in complex devices with a limited lifespan, you invest in a system that requires no services and frees up space in your house. Below, check how simple the transition is.
Replacing heating with IR panels is an investment you make only once for the next 40 years, whereas other systems would be completely replaced in that time. The IR system is installed in one day, without messy floor demolition, and by removing the old furnace, you gain additional usable space in the house. Because the system has no moving parts, it requires no servicing or maintenance, and the initial investment is lower than most comparable systems.
The electromagnetic spectrum includes a range of radiation – from gamma rays and X-rays on one side to radio waves on the other. Infrared radiation is located between visible light and microwave radiation - and this is a completely natural area for humans.
Ekosen IR panels operate exclusively in the IR-C spectrum – long-wave infrared radiation, which the body absorbs directly into the skin without deeper tissue penetration. This is identical to the heat you feel by a fireplace or in the late afternoon sun when UV radiation is no longer present.
The furnace is older than 15 years
The lifespan of gas and pellet furnaces is between 15 and 20 years. When the system reaches this age, you risk a breakdown in the middle of winter, when servicing is most expensive and waiting for spare parts is longest.
Energy costs are unpredictable
The prices of natural gas, heating oil, and pellets have fluctuated dramatically in the last 10 years – and the long-term trend is upward. Heating with IR panels is tied to electricity, which you can partially or entirely produce yourself in combination with a solar power plant. Independence from fossil fuels is a strategic advantage today.
Frequent and expensive repairs and services
When you pay 500–800€ for a single service or repair of an old boiler, you are investing in technology with no future. The IR system has no moving parts, so maintenance costs and annual services after installation simply no longer exist.
You are completely renovating a property
Instead of "renovating" old radiators and pipes, you replace the entire heating system in one day. Without dirt and demolition, you immediately increase the value of the house and free up space where the furnace previously stood.
You are planning a new facade or windows
With better insulation, you significantly reduce your heating needs. This allows you to install lower-power IR panels, meaning your initial investment in the heating system is lower right from the start.
The feasibility of replacement depends on your current heating source. The IR system completely replaces an old furnace or inefficient electric radiators, while also eliminating service costs that are unavoidable with other systems.
With every replacement, the key advantage is the same: instead of investing in a complex device with a short lifespan, you invest in a system that will operate maintenance-free for the next 35 to 40 years.
Replacing an old system with IR panels is clean and fast. Since there's no need for breaking up floors, installing pipes, or waiting for screeds to dry, the transition to new heating is simple:
Our expert measures the rooms on-site, checks the insulation and the electrical network. Based on this, they prepare an energy calculation with precisely determined panel power for each room individually.
You receive a fixed offer that includes everything: IR panels, smart regulators, all necessary materials, and professional installation.
If you are claiming a subsidy, Ekosen assists you with technical documentation and the installation report, which are mandatory parts of the application for Eko sklad.
Our team installs IR panels and smart regulators and takes care of the network connection. For an average house (up to 150 m2), the work is completed within one working day.
After installation, we set the regulators for optimal comfort and low consumption. Once the system is set up, it operates fully automatically, without the need for your additional work, servicing, or maintenance.
Eko sklad regularly announces grants for the replacement of outdated heating systems. IR heating is eligible for co-financing in certain calls - especially when replacing heating oil, old electric radiators, or gas.
There are currently no open Eko Sklad subsidies.
You are not alone when applying for the call. Ekosen prepares all necessary technical documentation for you (technical sheets for panels, calculations, and installation protocol), and you only need to attach proof of property ownership.
Eko Sklad calls are opened multiple times a year, and funds often run out before the deadline. Check the status of the call during the planning phase – not after signing the contract.
A turnkey investment in an IR system for an average house (120–150 m2) is approximately between 5,500 and 8,500€. The final amount depends on the building's insulation, window quality, and number of rooms. If you catch an Eko Sklad call, you can further reduce this initial investment.
The speed of investment payback depends on your current heating source, but in all cases, the IR system wins financially due to its long lifespan and lack of maintenance:
The greatest financial savings are evident in the long run. While you will likely have to completely replace other systems at least once in 40 years, IR panels require no additional investment during this time. Once the system is installed, you practically have no more heating costs – except for energy consumption.
Not necessarily. When you disconnect the old system, pipes and radiators can remain where they are. Nothing needs to be broken or pulled out of walls to install IR panels. The old wiring simply becomes inactive, and you avoid construction work and dirt. Only remove radiators if you want to free up space.
In most cases, yes. Our expert checks your network already during the first visit. Any potential adjustments are rare, quick, and do not require major construction work or high costs.
For an average house or apartment (up to 150²), installation takes only one working day. In the morning, the team arrives with equipment, and by evening, the system is ready for operation – without breaking walls, dust, or dirt.
No special construction work is required. You do not need your own electrician or prior installations. The only important thing is that access to the locations where the IR panels will be installed is clear. Everything else – from installation to connection – is handled by our team in one day.
Are you worried that the system might not heat and work as it should? For your peace of mind, a 15-year warranty and smart regulation ensure uniform heat in all rooms. Our specialist also performs a precise energy calculation, which includes a consumption guarantee.